Solar street lights with cameras is a system that integrates solar street lights with surveillance cameras and is powered by solar energy. It is usually installed in essential areas such as critical intersections, parking lots, farms, construction sites, mines, scenic spots, factories, villas, border posts, oil fields, etc. It monitors data through the use of 4G or WiFi networks. Wireless transmission to the control room enables remote monitoring of the above areas, reducing the risk of theft, vandalism, and unauthorized access. Since each solar street light with the camera is an independent system that uses solar power and a wireless network to transmit data, it can get rid of the restrictions of particular geographical environments such as mountains, forests, rivers, open areas, etc., and does not need to consider the wiring of power lines and communication optical cables, enabling rapid installation and application in scenarios without network or electricity.
Solar street lights with cameras can adopt all INLUX SOLAR solar street light models. Depending on the solar street light model used, there are two primary installation positions for cameras. The camera is directly integrated into the lamp housing if paired with an all-in-one solar street light. The camera will be installed on the light pole if paired with all-in-two or split solar street lights.
Lamp Power | 20 - 200W |
Luminous Efficiency | >180lm/w |
Battery Capacity | customizable |
Solar Controller Capacity | 10A / 15A / 20A (Customizable) |
Solar Panel Capacity | 60W – 720W (Customizable) |
CCTV Camera Type | Dome type / Bullet type |
Camera Internet Connection | 4G / Wi-Fi |
Camera Pixel | 2 megapixel (nominal) / 3megapixel (maximum) |
Pole Height | 4 – 15 meters (Customizable) |
System Life Span | >10 years |
Protection Levels | IP66 / IK09 |
Warranty | 3 – 5 years |
- optimizes h.265 compression algorithm to support mobile viewing
- Supports uploading alarm video to the FTP server
- supports APP remote wake-up and PIR alarm wake-up
- supports PIR three levels of sensitivity setting (high, medium and low)
- Supports setting of alarm recording time (alarm recording time of 10 s and 30 s can be set)
- Recording duration Alarm recording duration setting (10 seconds and 30 seconds can be set, 10 seconds by default)
- supports mobile phone remote wake up and PIR detection wake up
- The voice function supports listening and intercom
- Adopt Heath main processor
- Image sensor 1/2.8 "Ultra Low Illumination CMOS
- Audio compression algorithm G.711
- The default transmission bit stream is 1536Kbps
- Image size 1080P(1920x1080)
- Image Settings brightness, contrast, saturation, up and down inversion, left and right mirror adjustable
- The storage function supports microSD cards of less than 128G.
- Alarm linkage support to write alarm video into SD card and can be received by Android or Apple APP
- Volume control Adjusts the volume of listening and intercom
Our experienced professional sales engineers wil assist you with solar street light price quotations and technical proposals according to your specific project requirements.
Latitude 18th Road, New & High-Tech Development Zone, Yangzhou, Jiangsu Province, China
+86-514-87563215
Quick Links